Pedestal Paver Supports
Tile Tech Pedestal System is designed for concrete pavers, porcelain pavers, or Wood Deck Tiles to lay level over a built-up roof. Our PATENTED Hybrid screw-jack pedestal support system is an innovative product, allowing for self-leveling, single model for all height applications, screw adjustable, PVC pipe adjustable, and are stackable. The substrate can be either concrete or wood structure, with a roof membrane over the top.
Raised Decking Applications
Tile Tech Pedestal systems can be used in a wide variety of applications including, elevated decks, raised decks, tile decks, wood decks, porcelain decking, and sloped or level rooftops. Additionally, balconies, patios, urban parks, plaza decks, rooftop terraces, water features and walkways, and general landscaping are areas where pedestal systems excel.
Although most commonly used to support unit pavers – porcelain, concrete, stone, or structural wood pavers – they can also support wood joists to construct traditional wood plank decks.
For elevated decks using modular pavers, the pavers are supported only at each corner, additional pedestals can be added under the center or midway along the edge of a paver, depending on the paver size and anticipated loading.
Raised Paver Application
All our Pedestal Paver System products, including our standard and hybrid adjustable pedestals, create level rooftop decks over sloped surfaces. Tile Tech pedestals elevate and support Wood Tiles, Concrete Pavers, Porcelain Pavers, and a variety of other surfaces when sophisticated, commercial-grade decking is required.
Single Model Design
Allows for all height applications from low as 1/2” and as high as 54” (with double Lateral Bracing and Tray Systems) resulting in reduced labor and material cost. Eliminates leftover parts and pieces!
Screw-Jack Adjustable Pedestal
Our Adjustable Deck Pedestal System can be configured to be used with off-the-shelf PVC pipe or special 4″ male/female couplers or stack-able caps. The off-the-shelf, 4.215” diameter SDR-35 PVC sewer pipe allows the pedestal system to vary in height up to 54 inches (with double Lateral Bracing & Tray System) and is cut to the desired height using a 12” chop saw. The screw adjustable 4″ Uni-Coupler can also be used in lieu of any PVC pipe and will allow a height build-up of 24″. Additional low-height stack-able caps with built-in slope compensation are available for height ranges of 1/2″ to 2-1/4″ high. Our pedestals paver system includes built-in self-leveling with additional slope compensation plates at the bottom of the pedestal system.
Our Hybrid Pedestal™ System consists of 7 standard components and an off-the-shelf, 4.215” diameter SDR-35 PVC sewer pipe. The PVC pipe allows the pedestal system to vary in height up to 36+ inches and is cut to the desired height using a 12” chop saw. The Uni-Base is then “press fit” onto one end of the PVC pipe and a Uni-Collar onto the other end and requires no gluing or other attachments. Either 3/4”, 1-1/2” & 4″ Uni-Insert is then screwed into the Uni-Collar allowing for fine height adjustments. The assembly is completed by aligning and locking the Uni-Cap with the Uni-Insert. The Uni-Cap features include built-in self-leveling and removable 1/8” spacer tabs for proper paver spacing and joint alignment.
Paver & Tile Options
Tile Tech Pedestal System is designed for concrete pavers, porcelain pavers, or Wood Deck tiles to lay level over a built-up roof. Our PATENTED Hybrid pedestal support system is an innovative product, allowing for self-leveling, single model for all height applications, screw adjustable, PVC pipe adjustable, and are stackable. The substrate can be either concrete or wood structure, with a roof membrane or waterproofing over the top.